
Sunday, June 28, 2009
Needs new crank


This is the sofa room/ overflow/couch room and it needs a new crank for the window. Check out the room upstairs where Rick H. had BRICK. That may need cranks too.----- ACE didn't have the right ones.----- This is our friendly ACE Hardware man, Mike L. He is willing to help us find what we need to fix up the church! Thanks Mike!
Missing screws, --DONE---- NE double doors in main Sanctuary
NE corner of main sanctuary above double doors--DONE!!!


DONE!!!!!!This emergency exit light has been hit and needs some TLC from a concerned bondslave of Christ. The ladder is in the garage and the screwdriver is in the boiler room.---------------------Jay to the rescue!!!!-------------------Thanks! ---Jay put it back together and bought 4 new lights--replaced the 2 in these and hid 2 in the fire extinguisher box just below it.---Thanks Jay!!
This could use a second look.
Landscaping
No more erosion --DONE!






PVC pipe adaptor to fit gutter---DONE!
Sunday, June 21, 2009
Faucet on west side
Sunday, June 14, 2009
Hoop and post in back
White siding and snow fence
Friday, June 12, 2009
DONE!!!!!Bent and loose---no, straightened---YES!---- threshold at NE corner of main sanctuary



These aluminum door plates are bent and loose. My guess is that the Lift used to reach the ceiling put the weight on these that bent them. If they were fixed, raised a bit with cement under them would the Lift still be able to drive in the doorway?------------Progress!!!! Albert W. has straightened them in his press.-------- Stay tuned for the update!-------Done!--Thanks Albert W. They look great! While Al was at the doors he fixed a few other things that were broken on the door! Go Al Go!
Decorative iron in windows--DONE-- Sat. the 25th--

DONE----Thanks Mike T., Jeffrey W. and Ryan W. LOOKS GOOD!!!!!!!!!------------These keep coming loose and may fall down out of the windows. The problem seems to be that the iron is slotted and allows the screws to come out and away. They should have holes instead of slots. We could just add a drill hole in each foot pad. There are four and that is sixteen holes to drill. Maybe on a work day someone could make a plan, bring the tools (3/16 drill and drill motor) and bring closure to this hazard. We have a ladder in the garage.
Subscribe to:
Posts (Atom)